Skip to main content

Step by step guide


Pre-Pasted wallpaper combines the look and feel of traditional wallpaper with a simpler installation process. The adhesive is already applied to the backing, so there is no need for separate wallpaper paste.

Simply activate the adhesive with water, position each panel and smooth it into place. While wet, the wallpaper can be repositioned to help you achieve straight alignment and clean seams.

This guide takes you through everything you need to know, from preparing your wall to applying and trimming the final panel.

What is Pre-Pasted Wallpaper?

Pre-Pasted wallpaper has a water-activated adhesive already applied to the backing. Instead of applying separate wallpaper paste, the back of each panel is moistened with water before installation.

Once activated, the wallpaper can be positioned and adjusted while wet, making it easier to align panels and match the pattern accurately.

Why Choose Pre-Pasted Wallpaper?

  • No paste required

    No paste required

    The adhesive is already applied to the backing. Simply activate it with water before installation.

  • Easy to adjust

    Easy to adjust

    Panels can be repositioned while wet, giving you time to correct the alignment and match the pattern.

  • Clean, seamless finish

    Clean, seamless finish

    Pre-trimmed panels meet neatly edge to edge for a smooth, professional-looking result.

  • Easy to care for

    Easy to care for

    The surface can be gently cleaned with a soft, damp cloth for simple everyday care.

  • Simple installation

    Simple installation

    Water-activated adhesive makes installation straightforward, without the mess of traditional wallpaper paste.

  • Easy to remove

    Easy to remove

    Designed to strip away from properly prepared walls when it’s time for a change.

Where Can Pre-Pasted Wallpaper Be Installed?

Pre-Pasted wallpaper works best on smooth, clean and properly prepared walls. It is suitable for bedrooms, living rooms, nurseries, hallways, home offices, dining spaces and other interior areas.

It can also be used in moderately humid spaces, but should be kept away from direct water and excessive moisture, which may reactivate the adhesive. 

Measuring and Calculations

Measure the full width and height of the area at several points. Walls and ceilings are not always perfectly straight, so use the largest measurement when calculating.

If you plan to wallpaper an entire room, the full width of each wall will separately and add all wall widths together. This ensures that you order enough wallpaper and allows the pattern to continue evenly and consistently around the room.

Pre-Pasted panels are 30 inches, or approximately 76 cm, wide and are available in several standard heights. Custom heights may also be ordered to suit your project.

For more detailed guidance, see our guides on how to measure your Walls and measure your Ceiling.

Surfaces to Avoid:

Brick

Brick

Heavily textured surfaces

Heavily textured surfaces

Damp Walls

Damp Walls

loose paint or unfinished walls

loose paint or unfinished walls

Before You Begin

Proper wall preparation helps the wallpaper adhere evenly and makes installation easier.

  • Prepare the wall
    Remove dust, grease and loose material. Fill any cracks or holes and make sure the surface is smooth, clean and completely dry.
  • Remove fixtures
    Remove outlet covers, switch plates and other wall fixtures where possible. Always turn off the electricity before working around electrical fittings.
  • Check your panels
    Unroll the wallpaper and check that all panels are present and arranged in the correct order before installation.
  • Plan your starting point
    Start from the left side of the wall and use a spirit level to create a straight vertical guideline. Do not rely on the corner being perfectly straight.
  • How to Clean Pre-Pasted Wallpaper
    For everyday care, remove light dust with a soft, dry cloth.
    For marks or stains, gently wipe the affected area with a clean, damp cloth and moderate pressure. Avoid soaking the wall or allowing water to collect along panel edges.

Do not use:

  • Bleach
  • Solvents
  • Harsh household chemicals
  • Abrasive sponges
  • Scrapers
  • Aggressive scrubbing

Tools needed for Pre-Pasted wallpaper installation

Spirit Level

Spirit Level

Pencil

Pencil

Measuring tape

Measuring tape

Clean sponge

Clean sponge

Bucket of clean water

Bucket of clean water

Squeegee

Squeegee

Seam roller

Seam roller

Utility knife

Utility knife

A wallpaper squeegee is included with all full orders. Be sure to use a sharp utility knife when trimming the edges, as a dull blade may pull or fray the fabric instead of creating a clean cut.

How to Install Pre-Pasted Wallpaper, Step by Step

  • Prepare the wall
    Make sure the wall is smooth, clean and completely dry before installation.
  • Mark your first panel
    Use a spirit level and pencil to draw a straight vertical guideline for the first panel. This will help keep the entire installation straight.
  • Activate the adhesive
    Place the first panel face down on a clean surface. Evenly moisten the entire backing with clean water using a damp sponge or paint roller.
  • Let the adhesive activate
    Gently fold the wet sides towards the centre with the adhesive sides together, without creasing the wallpaper. Allow it to rest briefly until the adhesive becomes tacky. Fancy Walls specifies approximately 1–2 minutes for its material.
  • Position the first panel
    Unfold the top section and position it against the wall, aligning it with your guideline. Leave a little excess at the ceiling and floor for trimming.
  • Smooth into place
    Unfold the remaining wallpaper and smooth gently from the centre towards the edges, removing any air bubbles as you work.
  • Apply the next panel
    Activate the next panel in the same way and position it edge to edge with the first. Carefully match the pattern before smoothing it into place.
  • Continue across the wall
    Repeat the process one panel at a time, checking the alignment and pattern as you go.
  • Trim the edges
    Use a sharp utility knife and straight edge to carefully trim excess wallpaper along the ceiling, skirting boards and corners.
  • Finish the seams
    Check each seam and edge before the adhesive dries. Gently smooth any raised areas and wipe away excess moisture with a clean cloth.

Good to know

Activate one panel at a time so the adhesive does not begin drying before installation.
Make sure the entire backing is evenly moistened. Dry areas may not adhere correctly.
Handle the wallpaper carefully while wet, as the material can be more delicate during installation.

How to Remove Pre-Pasted Wallpaper?

Pre-Pasted wallpaper is designed to be strippable from a properly prepared wall.

Begin at an upper corner and gently lift the edge. Slowly pull the wallpaper downward, keeping it close to the wall as you work.

Removal results may vary depending on the wall surface, paint, primer and original preparation.

Do I need wallpaper paste to install Pre-Pasted Wallpaper?

No. The adhesive is already applied to the backing and is activated with water before installation.

How do I activate Pre-Pasted wallpaper?

Evenly moisten the backing with clean water using a sponge or paint roller, then allow the adhesive to activate briefly before hanging.

How long should I let the Pre-Pasted wallpaper rest?

Allow the moistened panel to rest briefly until the adhesive becomes tacky. 1-2 minutes.

Can Pre-Pasted wallpaper be repositioned?

Yes. Panels can be repositioned while the adhesive is wet, giving you time to adjust the alignment and pattern.

Do the panels of Pre-Pasted Wallpaper overlap?

No. Pre-trimmed panels are designed to meet neatly edge to edge.

Can I install Pre-Pasted wallpaper on textured walls?

It works best on smooth walls but may be suitable for lightly textured surfaces. Avoid brick, stucco and heavily textured walls.

Can I use Pre-Pasted wallpaper in a bathroom?

It can be used in moderately humid spaces, but should be kept away from direct water and excessive moisture, which may affect the adhesive over

Can I clean Pre-Pasted wallpaper?

Yes. Gently wipe with a soft, damp cloth. Avoid harsh cleaners, abrasive scrubbing and excessive water.

Can Pre-Pasted wallpaper be removed?

Yes. It is designed to be strippable from a suitable, properly prepared wall.

What if the Pre-Pasted wallpaper starts drying before I hang it?

Work with one panel at a time and make sure the backing remains evenly activated before positioning it on the wall.