How to install non-pasted wallpaper
Step by step guide
Give your walls a timeless and professional finish with traditional Non-Pasted wallpaper. Designed for both residential and commercial interiors, this wallpaper combines a smooth matte surface with a classic paste application for a durable, long-lasting result.
Unlike Peel & Stick or Pre-Pasted wallpaper, Non-Pasted wallpaper does not have adhesive already applied. Wallpaper paste is applied during installation, allowing the panels to be carefully positioned and adjusted before the adhesive sets.
What is Non-Pasted Wallpaper?
Non-Pasted wallpaper is a traditional wall covering that requires a separate adhesive for installation. The paste is applied during hanging, allowing time to position each panel and adjust the pattern before it sets.
The non-woven material has a smooth, matte finish and is designed for clean edge-to-edge installation.
Why Choose Non-Pasted Wallpaper?
-
Made for lasting interiors
A great choice for spaces where you want a more permanent wallpaper solution.
-
Adjustable during installation
The wet adhesive gives you time to straighten panels and carefully match the pattern.
-
Clean edge-to-edge seams
Panels are placed directly beside one another for a neat, continuous result without overlapping.
-
Smooth matte finish
The non-woven surface has a soft, refined appearance without a glossy finish.
-
Great for larger projects
A practical option for anything from a feature wall to full-room and commercial installations.
-
Detailed, vibrant prints
The material provides a smooth printing surface that keeps patterns looking crisp and colours looking rich.
Where Can Non-Pasted Wallpaper Be Installed?
Non-Pasted wallpaper works best in dry interior spaces such as bedrooms, living rooms, dining rooms, hallways and offices.
For the best result, install it on a smooth, clean, dry and properly prepared wall.
Surfaces to avoid:
heavily textured surfaces
Brick
Damp Walls
Loose or flaking paint
Non-Pasted wallpaper performs best on walls that are:
-
Smooth
For the best finish, the wall should be even and free from heavy texture, bumps, cracks, or other imperfections. -
Clean
Remove dust, dirt, grease, mould, and any residue before installation. -
Completely dry
Make sure the surface is fully dry before applying wallpaper. Newly painted or plastered walls should be left to dry for at least 30 days. -
Properly primed
Apply a wallpaper primer before installation to create a suitable surface for the wallpaper and adhesive. Avoid installing directly onto untreated drywall.
Measuring and Calculations
Measure the full width and height of the area at several points. Walls and ceilings are not always perfectly straight, so use the largest measurement when calculating.
If you plan to wallpaper an entire room, the full width of each wall will separately and add all wall widths together. This ensures that you order enough wallpaper and allows the pattern to continue evenly and consistently around the room.
Non-Pasted Wallpaper panels are 30 inches, or approximately 76 cm, wide and are available in several standard heights. Custom heights may also be ordered to suit your project.
Tools Needed for Non-Pasted Wallpaper Installation
Wallpaper paste
Measuring tape
Spirit level or laser level
Pencil
Paste brush or roller
Squeegee
Sharp utility knife
Clean sponge or cloth
How to Install Non-Pasted Wallpaper?
-
Prepare the wall
Remove dust, grease and loose material. Fill cracks or holes and make sure the surface is smooth, clean and completely dry. -
Arrange your panels
Lay the panels out in order and check the pattern before beginning. -
Mark your first panel
Use a level to draw a straight vertical guideline. Don't assume the corner of the room is perfectly straight. -
Prepare the adhesive
Mix or prepare a wallpaper paste suitable for non-woven wallpaper according to its instructions. -
Apply the paste
Spread an even layer over the area you're working on, avoiding dry patches or excessive adhesive. -
Hang the first panel
Position it against your guideline and gently smooth from the centre toward the edges. -
Continue with the remaining panels
Place the next panel edge to edge with the previous one and carefully match the pattern. Adjust its position while the paste is still workable. -
Trim and clean
Trim excess wallpaper with a sharp blade and wipe away any fresh adhesive with a clean, damp cloth. -
Leave to dry
Allow the wallpaper to dry naturally and avoid disturbing the seams while the adhesive sets.
Installation Tip
Cleaning & Care
Remove dust with a soft cloth. For small marks, use a clean, slightly damp cloth and gentle pressure.
Do Not use:
- Bleach
- Solvents
- Harsh household chemicals
- Abrasive sponges
- Scrapers
- Aggressive scrubbing
How to Remove Non-Pasted Wallpaper
Start at an upper edge and gently pull the wallpaper away from the wall. Work slowly rather than tearing it away quickly. How easily it removes will depend partly on the original wall preparation, paint, primer and adhesive used.