How to install grasscloth wallpaper
Step by step guide
Grasscloth wallpaper brings natural texture, depth and warmth to a space. Because it is made using natural fibres, each panel is unique and slight variations in colour and texture are part of its character.
Grasscloth requires a little more care during installation than standard wallpaper. Careful wall preparation, panel planning and clean handling will help achieve the best result.
What is Grasscloth Wallpaper?
Grasscloth is a natural wallcovering made from woven plant fibres applied to a backing.
Unlike printed wallpaper, natural variations between panels are expected. Differences in colour, texture and weave create the distinctive handcrafted look of grasscloth and should not be considered defects.
Visible seams are also a natural characteristic of the material.
Why Choose Grasscloth Wallpaper?
-
Natural texture
Adds warmth, depth and organic character to your walls.
-
Unique finish
Natural variations in colour and weave make every installation one of a kind.
-
Timeless style
A refined, textural finish that works beautifully in both modern and classic interiors.
-
Beautiful depth
Woven fibres interact with light to create subtle dimension across the wall.
-
Statement material
Creates visual interest without relying on a bold pattern.
-
Made from natural fibres
Brings the beauty and character of natural materials into your interior.
Where Can Grasscloth Wallpaper Be Installed?
Grasscloth is best suited to dry interior spaces such as bedrooms, living rooms, dining rooms, hallways, home offices and other low-moisture areas.
Avoid installing it in areas exposed to frequent moisture, steam, splashes or high humidity unless your specific grasscloth product is designed for those conditions.
It should be installed on smooth, stable and properly prepared walls.
Surfaces to Avoid:
Heavily textured or uneven walls
Brick
Damp or moisture-prone walls
loose paint or unfinished walls
Measuring and Calculations
Measure the full width and height of the area at several points. Walls and ceilings are not always perfectly straight, so use the largest measurement when calculating.
If you plan to wallpaper an entire room, the full width of each wall will separately and add all wall widths together. This ensures that you order enough wallpaper and allows the pattern to continue evenly and consistently around the room.
Grasscloth Wallpaper panels are 30 inches, or approximately 76 cm, wide and are available in several standard heights. Custom heights may also be ordered to suit your project.
Before You Begin
-
Prepare the wall
The wall should be smooth, clean, dry and properly primed. Remove dust, grease and loose material, and fill any cracks or holes before installation. -
Check your wallpaper
Unroll and inspect all panels before installation. Check the colour, texture and overall appearance, and make sure you are happy with the natural variation between panels. -
Plan your layout
Lay the panels out in order before hanging. This allows you to see how the natural tones and textures sit together across the wall. -
Prepare your workspace
Grasscloth can be sensitive to moisture and adhesive on its surface. Keep your hands, tools and work area clean throughout installation.
Tools needed for Grasscloth Wallpaper Installation
Measuring tape
Spirit level
Wallpaper adhesive suitable for grasscloth
Paste brush or roller
Squeegee
Sharp utility knife
Ladder or step stool
How to Install Grasscloth Wallpaper, Step by Step
-
Prepare the wall
Make sure the wall is smooth, clean, dry and properly primed. Fill any cracks or holes and allow the surface to dry completely. -
Plan your panels
Lay out the panels before installation and decide on their order. Natural variations in colour and texture are normal, so planning helps create a balanced finish. -
Mark your starting line
Use a spirit level and pencil to draw a straight vertical guideline. Do not rely on the corner itself being perfectly straight. -
Apply the adhesive
Apply an even layer of wallpaper adhesive suitable for grasscloth. Avoid using too much paste and keep adhesive away from the front surface. -
Position the first panel
Align the panel with your guideline, leaving a little excess at the ceiling and floor for trimming. -
Smooth gently
Use a clean wallpaper smoothing brush and work from the centre outward. Avoid pressing too hard or rubbing the natural fibres. -
Apply the next panel
Position the next panel carefully beside the first. Grasscloth seams are naturally more visible, so do not force the edges together. -
Continue across the wall
Repeat the process one panel at a time, stepping back regularly to check alignment and the overall appearance. -
Trim the edges
Use a sharp utility knife and straight edge to trim excess wallpaper at the ceiling, skirting board and corners. -
Finish and let dry
Check the seams and edges, then allow the wallpaper to dry naturally. Avoid excess moisture, heat or cleaning while the adhesive sets.
Good to know
Cleaning & Care
Grasscloth should be treated more carefully than washable wallpaper.
For everyday care, gently remove dust using a soft, dry cloth, feather duster or low-suction vacuum with a soft brush attachment.
Avoid water, wet cloths, household cleaners and abrasive products unless your specific grasscloth material is stated to be washable.
Spills should be dealt with carefully and as quickly as possible, as natural fibres may absorb moisture and stain.
Do Not Use:
- Bleach
- Solvents
- Harsh household chemicals
- Abrasive sponges
- Scrapers
- Aggressive scrubbing
How to Remove Grasscloth Wallpaper?
Start at an upper corner and gently peel the wallpaper away from the wall, working slowly to avoid damaging the surface. Remove any remaining adhesive carefully with warm water and allow the wall to dry completely before redecorating.